The community has a lot of talent, people constantly improve their own knowledge to reach a higher level. But the country's demand for high-end IT staff is still expanding, internationally as well. So many people want to pass EMC E22-275 certification exam. But it is not easy to pass the exam. However, in fact, as long as you choose a good training materials to pass the exam is not impossible. We ITCertKing EMC E22-275 exam training materials in full possession of the ability to help you through the certification. ITCertKing website training materials are proved by many candidates, and has been far ahead in the international arena. . If you want to through EMC E22-275 certification exam, add the ITCertKing EMC E22-275 exam training to Shopping Cart quickly!
EMC E22-275 exam candidates all know the EMC E22-275 exam is not easy to pass. But it is also the only way to success, so they have to choose it. In order to improve the value of your career, you must pass this certification exam. The exam questions and answers designed by ITCertKing contain different targeted, and have wide coverage. There is no any other books or other information can transcend it. The question bprovided by ITCertKing definitely ace exam questions and answers that help you pass the exam. The results many people used prove that ITCertKing success rate of up to 100%. ITCertKing is the only way that suits you to pass the exam, choose it equal to create a better future.
Are you an IT staff? Are you enroll in the most popular IT certification exams? If you tell me “yes", then I will tell you a good news that you're in luck. ITCertKing's EMC E22-275 exam training materials can help you 100% pass the exam. This is a real news. If you want to scale new heights in the IT industry, select ITCertKing please. Our training materials can help you pass the IT exams. And the materials we have are very cheap. Do not believe it, see it and then you will know.
Exam Code: E22-275
Exam Name: EMC (recoverpoint backup and recovery specialist exam )
One year free update, No help, Full refund!
Total Q&A: 126 Questions and Answers
Last Update: 2013-09-19
Those who want to prepare for the IT certification exam are helpless. But they have to do it. So they have restless state of mind. However, With ITCertKing EMC E22-275 exam training materials, the kind of mentality will disappear. With ITCertKing's EMC E22-275 exam training materials, you can be brimming with confidence, and do not need to worry the exam. Of course, you can also face the exam with ease. This is not only psychological help, but more importantly, it allows you to pass the exam and to help you get a better tomorrow.
ITCertKing provide you with a clear and excellent choice and reduce your troubles. Do you want early success? Do you want to quickly get EMC certification E22-275 exam certificate? Hurry to add ITCertKing to your Shopping Cart. ITCertKing will give you a good guide to ensure you pass the exam. Using ITCertKing can quickly help you get the certificate you want.
ITCertKing's expert team has developed a latest short-term effective training scheme for EMC certification E22-275 exam, which is a 20 hours of training for the candidates of EMC certification E22-275 exam. After training they can not only quickly master a lot of knowledge, but also consolidate their original knowledge. So they can easily pass EMC certification E22-275 exam and it is much more cost-effective for them than those who spend a lot of time and energy to prepare for the examination.
E22-275 Free Demo Download: http://www.itcertking.com/E22-275_exam.html
NO.1 Which device allows the installation of a Brocade splitter into a DCX director?
A. PB-48k-18i
B. PB-48k-AP
C. PB-DCX-32P-E
D. PB-DCX-48P-8G
Answer: B
EMC E22-275 exam dumps E22-275 questions E22-275 answers real questions E22-275 certification
NO.2 In a Brocade splitter implementation using frame redirect mode, how many DPCs are available?
A. 1
B. 2
C. 3
D. 4
Answer: B
EMC practice test E22-275 original questions E22-275 exam simulations E22-275 study guide E22-275
NO.3 You have installed the Solaris kdriver on a host. When validating the installation, you find that the
splitter is not seen by the RecoverPoint Management Application. Other splitters appear correctly in the
GUI.
Which step should you take on the host to discover the splitter by the GUI?
A. Run the /etc/init.d/kdrv start command
B. Run the rc.kdrv configure command and restart the kdriver
C. Run the rc.kdrv start command and reboot the host
D. Run the devfsadm command
Answer: A
EMC study guide E22-275 E22-275 E22-275 dumps E22-275 E22-275
NO.4 You are finalizing a RecoverPoint setup that makes use of the Symmetrix VMAXe splitter. You are about
to create the masking view for the RecoverPoint cluster initiator group.
Which setting must be enabled to allow the RPAs to write to the replica volumes when image access is
disabled?
A. Write Protect Bypass
B. Always Push Old
C. Backlog Mirroring
D. Device Tagging
Answer: A
EMC E22-275 test E22-275 test questions E22-275 original questions E22-275
NO.5 You are installing the RecoverPoint splitter agent on a B-Series switch. After downloading the agent
binary file to the blade processor, which step must be completed prior to successfully running the
command?
A. chmod +x agent_binary_file
B. chmod +rw agent_binary_file
C. /thirdparty/recoverpoint/install/zoning_script.sh
D. /thirdparty/recoverpoint/install/kdrv start
Answer: A
EMC answers real questions E22-275 test answers E22-275 E22-275 pdf E22-275 exam simulations
NO.6 When installing a Microsoft Windows kdriver splitter, you receive the dialog box shown in the exhibit
and the installation stops.
What must you do to recover the installation?
A. Click Next, correct the SAN issue, and run SAN Diagnostics again
B. Click Next and Accept the SAN issue warning to continue the installation
C. Click Next to resume the installation with flags
D. Click Back to reconfigure the kdriver parameters
Answer: A
EMC E22-275 exam simulations E22-275 study guide E22-275 certification training
NO.7 A customer has a RecoverPoint environment defined with two RPAs at each site. They created two
consistency groups (CGs), each one in a different RPA. Their business requires that both consistency
groups act as a single unit as they are dependent on one another.
How can they achieve this requirement?
A. Create one Group Set for both CGs
B. Enable the RecoverPoint Snapshot Consolidation feature
C. Select the same primary RPA for both CGs
D. Configure distributed consistency groups
Answer: A
EMC answers real questions E22-275 E22-275 exam simulations E22-275
NO.8 You have just enabled the zones and re-enabled the configuration on a AP-7600B switch. Where would
you run the thirdparty/recoverpoint/install/kdrv status command to verify the status of the kdriver on the
switch?
A. As root in the blade processor
B. As admin in the blade processor
C. As root in the control processor
D. As admin in the control processor
Answer: A
EMC E22-275 E22-275
NO.9 Refer to the Exhibit.
You are troubleshooting a RecoverPoint issue where consistency groups, using a kdriver splitter, have
stopped working. While analyzing the problem, you ran detect Fibre Channel targets from the SAN
Diagnostics menu. What does this output tell you that relates to the problem in the environment?
A. RPA is not zoned to any hosts
B. All RPA HBA ports are being used as targets
C. Even and odd ports should not see the same targets
D. Ports 0 and 3 should not be connected to the same fabric
Answer: A
EMC E22-275 braindump E22-275 certification training E22-275 answers real questions
NO.10 You have a customer with an EMC VNX array at each site that uses both block and file storage. They
would like to use the VNX splitter to replicate all their iSCSI data LUNs.
How would you configure RecoverPoint?
A. Use the Consistency Group Wizard to create a CG
B. Use Installation Manager and "Expose" all iSCSI LUNs
C. Check the "Enable iSCSI Replication" option in the CG profile
D. Replication of iSCSI LUNs are not supported at this time
Answer: A
EMC E22-275 E22-275 E22-275 E22-275 certification
NO.11 In a cascaded RecoverPoint configuration, a customer experiences a site failure at the secondary site.
What impact does this have on replication?
A.Site 1 to Site 2 replication fails Site 2 to Site 3 replication fails
B.Site 1 to Site 2 replication fails Site 2 to Site 3 replication continues
C.Site 1 to Site 2 replication fails Site 1 to Site 3 replication continues
D.Site 2 to Site 3 replication fails Site 1 to Site 3 replication continues
Answer: A
EMC E22-275 practice test E22-275 exam dumps
NO.12 You are selecting the RecoverPoint repository volume using Deployment Manager at a customer's site.
If the customer's environment makes use of an EMC VNX array, what needs to be considered?
A. Selected LUN will be formatted
B. Use of a thin provisioned LUN is supported
C. LUN is accessible by only one RPA
D. Thin LUNs have to be pre-allocated
Answer: A
EMC exam dumps E22-275 dumps E22-275 E22-275 study guide E22-275 braindump E22-275
NO.13 You have finished deploying SANTap in a RecoverPoint CRR environment. At Site 2 everything looks
fine. However, at Site 1 you see the following message on the RecoverPoint Management Application:
WARNING: RPA cannot access discovery AVT: 7001248288220000 ; Site1 ; RPA1 in Site1 ; Cisco -
CVT22-2109000dec3c3182
You have checked that back-end and front-end VSANs are properly configured with the correct members
in each. Which action can you take to perform a full discovery of ITLs and recreation of AVTs to fix this
issue?
A. SSH as 'admin' and run the refresh_santap_view command
B. Refresh the splitters on the RecoverPoint Management Application
C. Rescan the SAN on the RecoverPoint Management Application
D. SSH as 'admin' and run the get_santap_view command
Answer: A
EMC E22-275 E22-275
NO.14 You are implementing a RecoverPoint CRR solution. The RPAs that were delivered do not have the
correct version of RecoverPoint.
What is the EMC-preferred way to load the correct software version to the RPAs?
A. Before launching Deployment Manager
B. During the Deployment Manager installation process
C. After completing the installation but before the license is installed
D. After the installation is complete
Answer: A
EMC certification training E22-275 certification E22-275 pdf E22-275 E22-275
NO.15 A customer is planning to deploy a 2-node RecoverPoint cluster at each data center. They will make use
of dual stack for its LAN network connection.
How many IP addresses should the customer plan for per site, including management IP addresses.?
A. 5
B. 6
C. 7
D. 8
Answer: D
EMC E22-275 questions E22-275 practice test E22-275 E22-275 E22-275
NO.16 Which generation of RecoverPoint Appliance hardware must be used to ensure you can use a CRR
over FC configuration?
A. Gen2 and 3 only
B. Gen2 and 4 only
C. Gen2, 3, and 4
D. Gen3 and 4 only
Answer: D
EMC E22-275 dumps E22-275 study guide E22-275
NO.17 You want to upgrade a RecoverPoint environment using Deployment Manager (DM). As a prerequisite
to continuing with the upgrade, which TCP port needs to be open between the management station where
the DM is installed and the RPA management IP addresses?
A. 22
B. 23
C. 80
D. 161
Answer: A
EMC original questions E22-275 E22-275 E22-275 pdf E22-275 braindump
NO.18 Refer to the Exhibit.
You are troubleshooting High Load activities on two consistency groups (CGs). As part of your tasks, you
have run the data collect and are reviewing the system log files for the CGs.
What is a possible root cause for this High Load period?
A. The preferred RPA has lost communications with the remote RPA and caused a failover of the CG
within the cluster.
B. The local site has lost connectivity to the remote site and caused the CG to go into Marking mode.
C. There is no journal assigned to the CG in the local site, causing latency build up during data transfer.
D. The copies are cross-connected between the sites causing additional I/O to flood the connectivity
between the sites.
Answer: A
EMC answers real questions E22-275 test questions E22-275 E22-275
NO.19 What is the blade processor in a Brocade splitter?
A. A separate command shell which loads and operates the splitter
B. A special slot in a Brocade director with intelligent switch capabilities
C. A daughterboard in the switch to allow RecoverPoint integration
D. A dedicated memory space in the RPA to integrate with a Brocade switch
Answer: A
EMC E22-275 E22-275 exam simulations E22-275 certification E22-275 certification
NO.20 A customer wants to add a new RecoverPoint UserID. Which role must their UserID belong to in order to
manage user settings?
A. Security
B. Admin
C. Boxmgmt
D. Monitor
Answer: A
EMC E22-275 E22-275
ITCertKing offer the latest EX0-101 exam material and high-quality ICGB pdf questions & answers. Our JN0-730 VCE testing engine and 000-123 study guide can help you pass the real exam. High-quality 100-101 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.itcertking.com/E22-275_exam.html
没有评论:
发表评论