Featured EMC certification E20-335 exam test questions and answers

If you want to take EMC E20-335 exam, ITCertKing EMC E20-335 exam dumps are your best tools. The dumps can help you pass E20-335 test easily. And the dumps are very highly regarded. With our test questions and test answers, you don't need to worry about E20-335 certification. Because our dumps can solve all difficult problems you encounter in the process of preparing for the exam. Before you make a decision, you can download our free demo. For this, you will know whether our questions and answers fit to you or not.

Education degree does not equal strength, and it does not mean ability. Education degree just mean that you have this learning experience only. And the real ability is exercised in practice, it is not necessarily linked with the academic qualifications. Do not feel that you have no ability, and don't doubt yourself. When you choose to participate in the EMC E20-335 exam, it is necessary to pass it. If you are concerned about the test, however, you can choose ITCertKing's EMC E20-335 exam training materials. No matter how low your qualifications, you can easily understand the content of the training materials. And you can pass the exam successfully.

About EMC E20-335 exam, each candidate is very confused. Everyone has their own different ideas. But the same idea is that this is a very difficult exam. We are all aware of EMC E20-335 exam is a difficult exam. But as long as we believe ITCertKing, this will not be a problem. ITCertKing's EMC E20-335 exam training materials is an essential product for each candidate. It is tailor-made for the candidates who will participate in the exam. You will absolutely pass the exam. If you do not believe, then take a look into the website of ITCertKing. You will be surprised, because its daily purchase rate is the highest. Do not miss it, and add to your shoppingcart quickly.

ITCertKing is website that can take you access to the road of success. ITCertKing can provide the quickly passing EMC certification E20-335 exam training materials for you, which enable you to grasp the knowledge of the certification exam within a short period of time, and pass EMC certification E20-335 exam for only one-time.

In recent, ITCertKing began to provide you with the latest exam dumps about IT certification test, such as EMC E20-335 certification dumps are developed based on the latest IT certification exam. ITCertKing EMC E20-335 certification training dumps will tell you the latest news about the exam. The changes of the exam outline and those new questions that may appear are included in our dumps. So if you want to attend IT certification exam, you'd better make the best of ITCertKing questions and answers. Only in this way can you prepare well for the exam.

Exam Code: E20-335
Exam Name: EMC (Symmetrix Solutions Specialist Exam for Implementation Engineers)
One year free update, No help, Full refund!
Total Q&A: 105 Questions and Answers
Last Update: 2013-12-25

ITCertKing has a huge team of IT experts, who continue to use their knowledge and experience to study a lot of IT certification examination papers of past few years. Their findings of the research is now the product of ITCertKing, therefore ITCertKing's EMC E20-335 practice questions are very similar with the real exam, which can help a lot of people to realize their dreams. ITCertKing can ensure you to successfully pass the exam, and you can boldly Add ITCertKing's products to your shopping cart. With ITCertKing your dreams can be achieved immediately.

E20-335 Free Demo Download: http://www.itcertking.com/E20-335_exam.html

NO.1 How does Delta Set Extension help in an SRDF/A deployment?
A. Reduces RPO
B. Reduces the amount of required cache
C. Improves response time
D. Absorbs bursts of host writes
Answer: D

EMC exam prep   E20-335 test   E20-335

NO.2 Open Replicator pull will be used to move data between a third party array and a Symmetrix V-Max
array.
What is recommended before starting the Open Replicator session?
A. Ensure that the remote devices are Host read/write enabled
B. Ensure that the control devices are Not Ready
C. Ensure that the remote devices are Host inaccessible
D. Ensure that the control devices are Write Disabled
Answer: C

EMC   E20-335   E20-335   E20-335 braindump   E20-335

NO.3 You have been asked to create a configuration for a single engine Symmetric V-Max array with 8 DAEs
and 64 drivers. They would like to have the data devices with RAID 5(7+1) protection.
What would be the largest number of members you would recommend for a stripped metavolume.?
A. 4
B. 16
C. 8
D. 32
Answer: B

EMC   E20-335   E20-335 exam prep

NO.4 Where is the volume Logix Database maintained starting with DMX-3?
A. VCM gatekeeper
B. Symmetrix logical Volume
C. Symmetrix File System
D. VCM database.
Answer: C

EMC demo   E20-335   E20-335 certification

NO.5 Refer to the exhibit
What is the correct state for the Standard and Rl-BCV prior to issuing a symreplicate start command?
A. Synchronized
B. Suspended
C. Split
D. Write-Enable
Answer: C

EMC   E20-335   E20-335   E20-335

NO.6 What is required to ensure the integrity of data on the R2 volume during a SRDF fallback operation?
A. Remove entries from the file system table
B. Stop any applications that are accessing the R2 volume
C. Disable journaling on the file system
D. Suspend the RDF link
Answer: B

EMC   E20-335   E20-335 pdf

NO.7 In symmetric V-max series array running Enginuity 5874, which device is used as a pass-through
device for Auto provisioning?
A. VDEV
B. VCM
C. ACLX
D. SFS
Answer: C

EMC   E20-335 exam prep   E20-335 questions   E20-335   E20-335   E20-335

NO.8 Diagnostic messaging for the GNS daemon is written to which file?
A. /7SYMAPI/emc/storgnsd .log0
B. /SYMAPI/log/storgnsd.log0
C. /SYMAPl/usr/storgnsd log0
D. /SYMAPl/bin/storgnsd log0
Answer: B

EMC questions   E20-335 pdf   E20-335

NO.9 An SRDF failover has been executed during the testing phase of an implementation. What is the
expected status of the R1 and R2 devices after performing SRDF failover operation?
A. R1 and R2 Not Ready
B. R1 Wnte Disabled; R2 Read/Wnte
C. R1 Read/Wnte, R2 Read/Wnte
D. R1 Read/Wnte. R2 Wnte Disabled
Answer: Bhttp://www.scribd.com/doc/29541661/Srdf-Operations-white-Paper

NO.10 Refer to the exhibit.
A database server has its logs stored on a volume on the log source Symmetrix V-Max array and its data
stored on a volume on the data source Symmetrix V-Max array. Both source Symmetrix V-Max array
frames replicate data to the target Symmetrix V-Max array at the Remote site. There are two device
groups that have been defined:
One group for the data volume on the Symmetrix containing the data LUNs
One group for the log volume on the Symmetrix containing the log LUNS
What happens if the SRDF inks between the Symmetrix contain the data LUNs and the target Symmetrix
were to fail?
A. The R2 data in the database remains consistent because Enginuity Consistency Assist (RDFECAJ
technology would ensure data consistency).
B. The data in the database becomes inconsistent at the Remote site.
C. An SRDF failover would be initiated on all volumes and processing will automatically be switched over
to the Remote site
D. The R2 volumes in the Symmetrix V-Max containing the log LUNs would become write-disabled to the
database server
Answer: C

EMC exam dumps   E20-335   E20-335   E20-335 test   E20-335   E20-335 study guide

NO.11 Which file contains the parameter that can change the default behavior of SYMCLI operations, and
there control actions?
A. SYMCLI options File
B. SYMAPI Options File
C. SYMCLI Command File
D. SYMAPI Command File
Answer: B

EMC   E20-335 study guide   E20-335 questions   E20-335   E20-335

NO.12 On the Symmetrix platform, which type of RAID protection ensures the best random write performance?
A. RAID 1
B. RAID S
C. RAID 6
D. RAID 5
Answer: A

EMC exam   E20-335   E20-335 dumps   E20-335

NO.13 One of the requirements, during an Open Replicator implementation is that production application
should not be implemented by open Replication session. An analysis of the control Symmetrix showed
that FA ports are currently 70% utilized. How should pace and ceiling be configured?
A. Pace should be set to 0 and Ceiling should be left at the default
B. Pace should be left at the default and Ceiling set to 30
C. Pace should be left at the default and Ceiling set to 100
D. Pace should be set to 9 and Ceiling should be set to 70
Answer: B

EMC   E20-335   E20-335 practice test   E20-335 exam prep

NO.14 What is recommended before creating a TimeFinder/Mirror replica?
A. Ensure that the production application using the source devices is shut down
B. Ensure that all writes from the production application using the source devices are paused!
C. Ensure that the BCVs are not being actively accessed
D. Set the BCVs to a Not Ready state
Answer: Chttp://www.scribd.com/doc/37352326/Emc-Study-2

NO.15 Which command is used to set or reset HBA port flags on Symmetric arrays running Enable 7.0
Enginuity 5874?
A. symcfg
B. symmask
C. symconfigure
D. symaccess
Answer: D

EMC   E20-335   E20-335

ITCertKing offer the latest 1Z0-807 exam material and high-quality HP0-Y46 pdf questions & answers. Our JK0-U11 VCE testing engine and 70-487 study guide can help you pass the real exam. High-quality 70-461 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/E20-335_exam.html